Home
Service
Contact
   
 


We use a sanitary 3A food-grade milk truck to haul city water for potable use.  We obtain our water primarily from the City of Spokane via permits. Additional water sources when needed include Whitworth Water and Vera Water.  We routinely fill cisterns and holding tanks as well as swimming pools and hot tubs.  Many of our customers that have wells use us to fill holding tanks to get their systems started and as back up supply if their well is not performing well or has gone dry.  We also supply and have kept major well systems with water when their wells have gone down.
Our truck is capable of hauling approximately 4,000 gallons per load.  We can help you calculate how many loads you may need if you know the size of your swimming pool or cistern.

To order call Lisa at (509) 487-9171 or (509) 483-0151


Deliveries are Monday through Friday.  NOTE: During peak seasonal times advanced ordering is required.





LUBRICATION – Lube chassis, check oil level in hubs, check lube disc on 5th wheel couple

Suspension – Visual check all parts; i.e. loose U bolts, torque rods, broken springs

BRAKES – Adjust slack adjusters, drain air tanks, visual check for problems, apply air – check for leaks

HITCH – Visual check for cracks, wear, loose bolts, etc.; check safety cables & connections, check reach for wear, cracks, etc.

LIGHTS – Check for operation and clean lens as necessary

LOAD/UNLOAD SYSTEM – Check over load protection for operation, check pump equipment for leaks/operation, check system for leaks.

WHEELS – Check for cracks, broken studs, loose nuts, check tires for minimum wear, etc.


LUBRICATION – Lube chassis, check oil level in hubs, check lube disc on 5th wheel couple

Suspension – Visual check all parts; i.e. loose U bolts, torque rods, broken springs

BRAKES – Adjust slack adjusters, apply air-check for leaks; Drain tanks check for containments, fill alcohol injector reserve, check for problems, wear, missing dust shields, etc.

HITCH – Visual check for cracks, wear, loose bolts, etc.; check safety cables & connections, check reach for wear, cracks, etc.

LIGHTS – Check for operation and clean lens as necessary

LOAD/UNLOAD SYSTEM – Check over load protection for operation, check pump equipment for leaks/operation, check system for leaks.

WHEELS – Check for cracks, broken studs, loose nuts, check tires for minimum wear, etc.


CAB – check horns, windshield wipers & washers, instrument & dash lights, PTO operation & warning, glass & mirrors, heater & A/C, air seat operation & lubrication, upholstery, seat belts, weather seals & door adjustments, sheet metal for damage, loose paint, etc.

CLUTCH – Check free play & clutch brake

SAFETY – Inspect & shake fire extinguisher, check for emergency triangle reflectors, check first aid kit, check all hazardous material placards – in place & legible, check for exhaust leaks & excessive smoke, check door hardware, handles, steps, etc, check mirror brackets for tightness.

ELECTRICAL – Clean batteries & check water level, check starter operation, check alternator charging rate.

COOLING SYSTEM -  check anti-freeze level, change water filter as necessary, test chemical PH level, visually check hoses & radiator for leaks, check all belts for wear & tension

FUEL SYSTEM – Check for leaks, injector lines, crossover lines, tank, etc.

TIRES – Inflate to proper PSI, check for misalignment or erratic wear.

STEERING – Check steering gear & steering linkage for looseness. Inspect oil seals for leakage, inspect front springs & U-bolts.

AIR & BRAKE SYSTEM – Compressor operation – check air build time. Check cut in & cut out governor pressure, check air pressure drop, check air drier operation, check hand valve operation, check parking brake, check low air pressure warning device, check wet tank for oil, visually check remaining brake lining & leaking seals, visually check chamber, cams, slacks, lines, etc for defects, audible check for air leaks, inspect glad hand & rubber for wear & crack, check brake interlock system, clean & lubricate application valves.

DRIVE LINE – Visually inspect for seal leaks, check U-joints, yokes, pinions & carrier bearing.

PERFORM “A” INSPECTION – See items above

LUBRICATION – Perform full service, oil change, oil filter(s) & fuel filter change, check oil level in transmission & rear ends, check and clean vents as necessary. Lubricate door hinges & strikers on cab & toolboxes, lubricate license plate hinge.


 
   
Top